The Toro Titan Z5200 zero cutting is propelled by a 24 hp Briggs and Stratton engine that drives the platform and spring wheels. The engine is a tw o-cylinder model with head valves. It also has a pressure lubrication system to keep everything working without problems. The cylinders are covered with cast iron to prolong their useful life. The gasoline deposit of the Z 5200 Titan may contain up to 15. 1 liters (4 gallons USA).
The Titan Z5200 bull engine activates the cutting platform through a belt transmission system that attaches to electric force. The cu t-off steel platform is made of 10 caliber steel. In the front of the cutting platform there are 3 ant i-cutting caliber wheels that allow it to accurately follow the soil contours without risk that the ground is hooked or scraped (whichYou can leave bald land on your grass). The cu t-off platform has a 5 2-inch cut width, but with the plastic flap on the side, it has a total width about 10 inches. The cutting platform has a 3-inch operating range, from a minimum of 1. 5 inches above the ground to a maximum of 4. 5 inches above the ground. The elevation and descent of the platform is carried out by means of a sprin g-assisted lever.
The Titan Z5200 bull engine drives the wheels through a double hydrostatic transmission system that easily controls the speed and direction of the corteped using the levers located in front of the operator. The levers are totally adjustable to adapt to the operator height. The maximum speed of the Z 5200 Titan is 11. 3 km/h in advance, while in reverse it can reach 8 km/h. Models quite similar to this in the Titan range are the Titan Titan ZX5400 and the Titan ZX5020 Specifier.
