Toro TimeCutter ZX480


The ZX480 Toro Toro Toro Toro Toro Toro Specked has a cutting platform with a 4 8-inch cutting width. The blades of this platform are operated by Correa. The blades are made of 1/4 ″ steel thick. Steel has been thermally treated so that the blades remain sharp longer. The cutting platform can be raised and lowered by a total of 7 different positions from a height of 4. 5 inches to a height of 1. 5 inches above the ground. The cutting platform rises and lowers by means of a sprin g-assisted pedal. The ZX 480 Timecutter blades are engaged by a Mag-Stop electrical clutch of the TDF. There are a total of 3 different options to treat cut grass cuts. Many people buy the optional borrowing accessory to collect cuts, while others use a crusher kit. Alternatively, you can download the cuts on the side of the housing.

The engine that activates the Toro Timecutter ZX480 ZX480 zer o-torus platform is a Briggs and Stratton bicylindrical model that develops 18 CV with a total displacement of 0. 656 liters. The engine starts with a 12 volt battery. It has a double element air filter to clean the air inlet before combustion cameras. Briggs and Stratton uses a pressure lubrication system with a rotating oil filter. The engine power reaches each rear wheel independently thanks to a Double C-IZT hydromotor system and Charge pumps.

The amount of power that each rear wheel receives is controlled by the double levers located in front of the driver. The rear wheels have grass thread and measure each 18 × 10. 5 (18 inches in diameter, 10. 5 inches of width), while the fronts are much smaller, measuring 10 × 4 (10 inches in diameter, 4width inches). Other Timecutter models include the Timecutter Z4220 bull and the Timecutter Z5000 bulls that are of a size similar to it.

Leave A Comment