The Zero Swisher ZT2866 Giro Swisher Swisher obtains its power from a Briggs and Stratton engine. It is a tw o-cylinder engine that provides impressive 28 hp to the wheels and the ZT 2866 blade. The 4-stroke engine uses head valves and a pressure lubrication system to avoid excessive wear of mobile parts. The engine is launched with a 1 2-volt battery that comes with the corteped when you buy it for the first time. As it is a zer o-rotation host, it is obviously hydrostatic, which means that you will never have to change your march on it.
Instead, the operator has 2 bars back in front of him when he is sitting at the Swisher ZT2866. Pressing both forward makes the corteped go forward, while pulling both backwards it allows you to go back. When the operator pushes each bar back into opposite directions, it allows the ZT-2866 to turn with radio zero. In other words, it allows you to turn in a ten cents. This hydrostatic transmission provides the corteped with a maximum speed of 9. 7 km/h both forward and back. Both the power and the turn are controlled by the rear wheels. That is why they are so large, they measure 20 × 10 (20 inches in diameter, 10 inches of width), while the front wheels, which actually only prevent the top platform from hitting the ground, measure 11 × 4 (11 inches ofdiameter, 4 inches of width).
The Swisher ZT2866 Swisher Platform has a very large 6 6-inch cut width. The top of the cortesped houses 3 blades that are also part of a mulching system that quickly converts grass cuts into a highly nutritious mulch. The Platform of the Corteped is made of 11 different caliber steel. It has 8 different cutting positions, from a height of 5. 75 inches above the ground to a height of 1. 5 inches above the ground. Click here to buy the Swisher ZT2866.
