Snow Joe SJ908 Snow Blower


The Snow Joe SJ908 Snow Blower is a very large machine. It’s not as big as the Snow Joe SJ909 Snow Blower, but it’s much bigger than the Snow Joe SJ906 Snow Blower or the Snow Joe SJ803 Snow Blower. It is a double stage snowblower and therefore uses both a steel auger and an impeller to break up the snow in front of it. The SJ908 casing bit is made of toothed steel and has a diameter of 0. 28 m (11 in). This moves the snow towards the impeller located in the center of the casing. The impeller consists of 3 blades and is made of steel. It has a diameter of 0. 3 m (12 inches).

Once the snow has been properly broken up, the impeller shoots it through the chute to a distance of 9. 14m from the snowthrower. The chute used to direct the snow is made of steel and can rotate up to 180 degrees. It is remote controlled in conjunction with the deflector so the operator never has to stop the Snow Joe SJ908 snow thrower to make an adjustment. Adjustments can be made on the fly.

The Snow Joe SJ908 Dual Stage Snow Thrower has a clearing width of 0. 76 m (30 inches) and a clearing height of 0. 53 m (21 inches). With the addition of drift snow cutting blades that can be attached to the sides of the housing, this 30-inch snow blower can tackle even greater depths of snow. The total weight of the machine is surprisingly light: it only weighs 86. 2 kg. The snow thrower uses specially designed snow tires that have a diameter of 0. 38 m (15 inches) and a width of 0. 13 m (5 inches).

Leave A Comment