Husqvarna YTH2042


The Husqvarna YTH2042 Speaker is a 20 hp machine with a 4 2-inch cutting platform. A model very similar to this is the Husqvarna LTH18538 cutting except that it has a smaller cut platform, while the Husqvarna Yth21K46 is also quite similar except that it has a larger cut platform. The engine that drives the YTH 2042 is a 0. 5 4-liter intek model, manufactured by the Briggs and Stratton team. This 20 hp monocylindrical engine is air cooled. The engine provides the corteped with a maximum speed of 8. 4 km/h.

The Husqvarna Yth2042 uses a comfortable ergonomic flying that makes it handle for long periods of time is much more comfortable than the old flyers that did not adapt so well to the user’s hands. While the driver’s seat is not exactly solid, it is still comfortable enough for many hours of continuous operation. As mentioned before, the cutting width of the cutting platform is 42 inches, although the total width of the cutting platform is actually 1. 24 m (49 inches) due to the discharge fin that stands out forThe side of the platform. Like all the Husqvarna cutting platforms, it is built in printed steel. It can be raised from 1. 5 inches above the ground to 4 inches above the ground in hal f-inch steps.

The Husqvarna Yth 2042 Speaker Tractor is a very capable machine in most gardens that vary in size around 0. 5 to 4. 5 acres. It is also absolutely useful around the gardens that have an abundance of tight corners and difficult areas to navigate thanks to the fact that it has a minimum turning radius of just 16 inches. If you have one of these Husqvarna sort of 20 hp and 42 inches, leave us your opinion detailing what you like and what you don’t, as well as the accessories you use. Click here to buy the Husqvarna YTH2042.

Leave A Comment