The Cub Cadet GT2000 Speaker is the smallest machine of the 2000 Series Standing Sector line produced by Cub Cadet. The largest models are the CUB CADET GTX2100 and the CUB CADET GTX2154. All these machines are mounted on corteped tractors. The GT 2000 is a Bicilindrical engine in V Command designed and manufactured by Kohler. The engine power is 20 hp. This power reaches the wheels of the vehicle through a hydrostatic transmission. This makes it very easy to handle, since it means that to accelerate, all you need to do is simply press the pedal more strongly, while to reduce speed, you just have to loosen the accelerator pedal.
The CUB Cadet GT2000 Speaker is compatible with 3 different types of platforms. The smallest is a cutter with a 4 2-inch cutting width. This platform has 2 smaller blades instead of a large blade. The next largest platform has a 5 0-inch cut width and has 3 blades inside the platform instead of a large one. The largest platform in the GT 2000 has a 5 4-inch cut width and also consists of 3 small blades. Keep in mind that the total width of the cutting platform will always be about 25 cm greater than the cutting width because the discharge fin is located on the side.
Each of the cut2000 cadet cadet cut platforms can be adjusted from 1. 5 inches above the ground to 4 inches above the ground. The cutting platform has 10 different positions between 1. 5 inches and 4 inches. The maximum speed of GT 2000 is very impressive with 10. 5 km/h (6. 5 mph). The fuel tank of this corteped is very large, with capacity for 17 liters of gasoline.
