The Toro Z Master G3 series consists of many similar machines that each have a 4 8-inch cutting platform. These are the 74901, 74922 and 78922 models. The main difference between each of these 3 models is the engine that each one uses. The 74901 bull uses a 23 hp Kohler Command engine. The 74922 bull and the 78922 bull have the same 24 hp Kawasaki engine. In addition to its engines, practically everything is the same in these zer o-rotation hosts of the Z Master G3 series with 4 8-inch housings.
The cutting housings of the 3 Toro Z Master G3 Species of 48 ″ are identical and all are built with resistant 7 caliber steel. The cutting platform has a special bumper ‘bull nose’ that prevents the platform from flexing in any case in which a fixed object on the ground is hit. In addition, the cutting platform also has a set of small plastic wheels set in the front of the platform that prevents the ground from scraping in front of it. The specific name of this platform is Turbo Force platform. The cutting platform has a wide range through which it can be adjusted, from as low as 1 inch of the ground, to 5. 5 inches above the ground. It can be raised and down in increases of 0. 25 inches.
The maximum speed of the zer o-toro z Master G3 torus g3 torés is 16. 1 km/h (10 mph). The address as well as its speed is controlled via 2 Back bars controlled by hand in front of the driver. Thanks to the dual hydrostatic transmission, these Z Master G3 48 ″ have a zero rotation radius. Although the cutting platform has a cutting width of only 48 inches, you will be glad to have a huge fuel tank of 45. 4 liters (12 US gallons). It will also be happy to see that these machines have a folding antivuelco bar (ROPS) to protect the driver in case the machine turns on a slope.
