Toro e-Cycler 20360


The E-Cycler 20360 of Toro is a wireless cutting that works with batteries and is a thrust model with a driver on foot. This machine is aimed at consumers most aware of the environment, since they do not have to worry about emissions. Obviously, there is no need to worry about whether or not carb is compatible. The 36 volt engine activates the platform of the corteped, allowing it to cut between 7, 000 and 10, 000 square feet (depending on variables such as the height of the grass, thickness and dryness). The 20360 Ecycler engine needs to be regularly recharged. In 3 hours you can recharge the battery up to seven tenths of its total capacity, while you will need a whole night to load it completely.

You may think that the E-Cycler 20360 Toro Speaker, being a cable without electric motor, will be very heavy. Fortunately it is not so. The total weight of the machine is only 77 pounds (or 35 kg for Europeans). Apart from the engine that drives it, most of the rest of the Ecycler 20360 is the same as you can expect from a Toro Speaker with a walking driver. The cutting platform is made of steel. The platform has a total width of 20 inches. It works on a 3-inch range, from a 1 inch low on the ground to a 4-inch high.

The limited guarantee in the E-Cycler 20360 bull covers it for 2 years, which is something that you would expect from such a well-known brand. The Ecycler 20360 de Toro cover is very deep. The purpose of this deep cover is that the blade can easily crush the grass cuts, even if there are a lot of them. If you do not plan the cuts, then you can barely leave them in the grass or pick them up in a rear bagger.

Leave A Comment