The Zero Snapper 26/48 Giro Sortation is considered by the majority as the Giro Zero Commercial Giro Higher Quality Snapper. It is part of the 500z series of Snapper’s hosts. The engine that drives the 2648 is an OHV engine of the extend life of Briggs and Stratton. This engine is a bicylinder with a total displacement of 0. 34 liters. The engine produces a power of 26 hp. The fuel tank capacity is very large. It is able to contain up to 30. 3 liters of gasoline, which is enough for many hours of continuous operation before it is necessary to fill it.
The Snapper 26/48 motor power is transferred to the rear wheel by means of a double Hydro-Gear hydrostatic transmission, the ZT-2800. This transmission provides a higher performance to 2648. This transmission provides a maximum speed of 12. 9 km/h (8 mph) to 2648 when it moves forward. But this decent maximum speed is not the most important thing that dual hydrostatic transmission provides the corteped. It is the fact that it allows the operator to control each rear wheel independently what is so attractive, since it allows it to make turns without radio (that is, zero radio turns).
The 3 Knife platform of the Snapper 26/48 has a 4 8-inch cutting width. It works from 1. 5 inches above the ground to 4. 5 inches above the ground. It can be adjusted in increases as low as 0. 25 inches so that you can almost always get the cutting height you want. The rear wheels of this machine are quite large with measures of 20 × 10-10 (20 inches in diameter, 10 inches wide, 10 inches in tire diameter), while the front wheels measure 11 × 4-5 (11inches in diameter, 4 inches wide, 5 inches in tire diameter). If you are looking for commercial spi n-zero spi n-off similar to Snapper 2648, you may be interested in taking a look at Snapper ZT2446 or Snapper ZT2654.
