The zer o-rotation spi n-spi n-spi n-spi n-spi n-spi n-awarder is the smallest machine of the JD’s Pro 800 series. The largest models include the John Deere Z820A and the John Deere Z830A. The JD Z810A is propelled by a 22 hp kawasaki engine. This engine has a total displacement of 0. 675 liters. The engine uses a full pressure lubrication system to ensure that everything works without problems and without risk of grab. The engine uses a cartridge air filter with a prefilter to purge the air inlet of dust and other impurities. The engine is launched with a 1 2-volt battery that is recharged with a 20 amps alternator once the engine is running.
This Kawasaki engine transfers the power to the John Deere Z810A wheels through a double hydrostatic transmission that allows the rear wheels to be controlled independently. The maximum speed at which this dual hydrostatic transmission allows you to move to the JD Z810A is 19. 3 km/h (12 mph) and in reverse can move up to 8 km/h (5 mph). The rear wheels, through which the power is transferred, measure each 24 × 12-12 (24 inches in diameter, 12 inches of width, 12 inches in tire diameter) while the front wheels are much smaller dueThey can’t stand so much weight. Each measures 13 × 6. 5-6 (12 inches in diameter, 6. 5 inches of width, 6 inches in tire diameter).
The John Deere Z810A Specker platform has a 5 4-inch cutting width (optionally it can be achieved with a 4 8-inch platform too). This platform has 3 blades. The blades are operated by Correa. They can be raised and down in small measures of 0. 25 inches from a minimum of 1. 5 inches above the ground to a maximum of 5 inches above the ground. The total weight of the JD Z810A is 577. 9 kg (1274 lbs).
