John Deere Z710A


The John Deere Z710A Zero Turn Mower is powered by a Kohler Command engine. This engine is a 2-cylinder model that has a total displacement of 0. 674 liters. The engine has overhead valves and is kept cool by an air-cooling system. The maximum power of this Kohler engine is 23 HP. The JD Z710A features an operator presence system for added safety. It has a top speed of 16. 1 kph (10 mph) when moving forward, while in reverse it can reach a top speed of 7. 2 kph (4. 5 mph). Remember that the rear wheels of this mower drive and control its speed. The amount of power that each rear wheel receives is controlled by the corresponding lap bars located in front of the driver. By pushing each spin bar in opposite directions, you can execute zero radius spins. Mower speed is controlled by an internal wet disc brake system.

The rear wheels on the John Deere Z710A zero-turn mower, which do most of the work, measure 22×11-10 (22-inch diameter, 11-inch width, 10-inch rim diameter), while the front wheels, which really just balance the mower deck and help keep it from scraping the ground in front, measure 13×5-6 (12-inch diameter, 5-inch width, 6-inch rim diameter). The deck on the JD Z710A mower is a custom 7 Iron II deck that is made from a single piece of stamped 7 gauge steel. This means that it is much less likely to break than a corresponding cover made from welded or bolted 7 gauge steel.

There are a total of 4 caster (anti-fouling) wheels attached to the front of the mower deck on the John Deere Z710A (2 in the center, one on each side). These cause the floating mower deck to follow the contours of the ground it is traveling over. The overall cutting width of this mower is 48 inches. Other JD zero-turn mowers include the John Deere Z445 and the John Deere Z655.

Leave A Comment