John Deere 1630


Tractor John Deere 1630 is a fairly old model. It appeared for the first time in 1973 and its production ended in 1979. The tractor was manufactured on two floors, one in Spain and another in Germany. The tractor is propelled by an engine John Deere 3179DL-01. It is an atmospheric engine. It is an atmospheric engine with a total volume of 2. 9 liters. The JD 1630 engine is refrigerated by liquid and has 3 cylinders. The tractor works with diesel. Use a dr y-type air filter to prevent dust and other small particles being aspirated by the engine with air intake.

The John Deere 1630 can choose between 2 different transmissions when he buys it for the first time. The smallest gives the tractor 8 speeds in advance and 4 in reverse. The biggest doubles the gear options, 16 forward and 8 for reverse. JD 1630 has a total sending weight of 2131 kg (4700 lbs). The tractor length is 3. 55 m (140 inches), while the wheelbase is 2. 04 m (80. 7 inches). The tractor is built on one of the 2 chassis available. The first is a 4×2 2WD and the other is a 4×4 MFWD 4WD chassis.

The front wheels of the John Deere 163o vary depending on the chassis. In the 2WD version, the front wheels measure 7. 5-16 (7. 5 inches of width, 16 inches in tire diameter), while in the 4WD version, the front wheels measure 9. 5-24 (9. 5width inches, 24 inches in tire diameter). In both models, the rear wheels are the same size, each measures 13. 6-36 (13. 6 inches wide, 36 inches in tire diameter). If you have ever had or used the JD 1630 tractor, leave a comment in the following form. You must mention both the good and bad points you have found in the tractor so that possible buyers have a good idea of their pros and cons.

Leave A Comment