Husqvarna WHF6123


The Husqvarna Whf6123 Specker is not the typical 2 1-inch thrust spring. This machine is more oriented to gardening professionals. Hopefully this is quite obvious because it has a massive width of 61 inches. The filter cover floats and is made of 10 gauges, with the exterior edges made of 7 galley steel. The cutting platform has a large cutting range of 4. 5 ″. It can operate as low as 1. 5 inches above the ground and up to 6 inches above the ground when you are cutting long, wet grass and thickets. The blades of the WHF 6123 cut platform are operated by Correa. They are engaged by means of an electric force. There are 3 blades housed inside the platform. There are also 3 unfolded wheels at the front of the platform that act to prevent the “deframe” from the grass.

Husqvarna WHF6123 can handle up to 3 grass acres per hour. It is driven by a kawasaki engine. It is a bicylindrical engine with pressure lubrication that produces a power of 23 hp. The engine power reaches the rear wheels through a Kanzaki pump and a Parker wheel motor system that provides the Sel f-propelled HF 6123 cutting a maximum speed of 11. 3 km/h forward (although this can be a bitToo fast for some people!).

The rear wheels of the Husqvarna Whf6123 measure 20 × 7. 5-8 (20 inches in diameter, 7. 5 inches wide, 8 inches of tire diameter). They are quite large, since they support most of the weight and also activate the corteped. The front wheels are smaller, each measures 11 × 3. 5-5 (11 inches in diameter, 3. 5 inches of width, 5 inches in tire diameter). The total weight of the zero spi n-rotation cortempted 6123 is 308. 4 kg (680 lbs). Other similar husqvarna cutcases are Husqvarna Whf5223 and Husqvarna Whf4817 although both are a little smaller.

Leave A Comment