The Husqvarna RZ4219F mower has the same cutting width as the Husqvarna RZ4216 and Husqvarna RZ4222F mowers. The engine that powers the RZ 4219 F is from the Professional Series, designed and manufactured by Briggs and Stratton. The engine uses a standard type air filter to clean the air intake of dust and other particles that can potentially clog the combustion chambers and impair engine performance (even in very small amounts). The total power of the engine is 19 hp. The engine is fed with gasoline from a fuel tank with a capacity of 11. 4 liters.
The Husqvarna RZ4219F zero-turn mower uses an EZT dual hydrostatic transmission to get power from the engine to the wheels. This transmission system is what allows the driver to drive each rear wheel separately and thus perform zero radius turns. The maximum speed of the RZ 4219F forwards is 10. 5 km/h, while in reverse it can reach up to 5. 6 km/h.
The mower deck on the Husqvarna RZ4219F is made of 11 gauge steel. The blades on the deck are belt driven. The deck blades are belt driven by an electric clutch. In total there are 3 blades housed within the platform. This gives the deck an overall width of cut of 42 inches. Using a spring-assisted lever, the operator can raise and lower the mower deck from a minimum height of 1. 5 inches above the ground to a height of 4. 5 inches above the ground. When operating optimally, the RZ 4219 F can cut up to 6. 5 acres of grass every hour. To dispose of grass clippings, you can either dump them off the side of the header, mulch them, or choose to purchase a rear bagging attachment to collect them.
