The Cub Cadet LTX1042 cadet is a bit more powerful than the Cub Cadet LTX1040, since it has a Kohler engine that produces 20 hp of output power, which is identical to the output power of the Cub Cadet LTX1045 Cub Cadet Cadet Tractor Power. This engine transfers power to the wheels through a hydrostatic transmission that makes the LTX1042 automatic. This means that it is not necessary to change the march. Just step on the speed pedal more thoroughly to accelerate or release it to reduce speed. The engine turns on with a 12 volt battery. Unfortunately, the LTX 1042 has no assisted direction, only manual.
The Cub Cadet LTX1042 cadet has a digital clock that records how many hours of operation it has. It is a fantastic tool to calibrate correctly when it is the next time you have to review it. The cutting cover in the LTX 1042 has a 4 2-inch cutting width and has approximately 1 wheel in each corner to prevent the roof from scraping the ground when the cutter cover is particularly low. The Cadet Cubt platform can be lowered to 1. 5 inches above the ground and rise in increases of 0. 25 inches until it is 4 inches above the ground.
The LTX1042 cadet is a new model and, as such, has a whole series of characteristics that make it much safer to handle than the previous models. The engine can only be started when the LTX 1042 is in the dead point and if the driver leaves the top of the host, the engine will turn off. Like many Cub Cadet cadet, there is a wide range of compatible implements that can convert the cutter into a multipurpose machine. There is a 4 2-inch snow blower that can be attached, as well as rollers, cars and sprayers.
