Cub Cadet LT1046


The Cub Cadet LT1046 cadet is from the same family of tractors as the CUB Cadet LT1045, the CUB CADET LT1042 and the CUB CADET LT1040. It has a 4 6-inch platform that houses 3 blades that work to give a much more uniform and clean cut to its grass than a single blade working alone. The platform is adjustable about 3 inches from a 4-inch high on the ground when you have to cut the herb very long and/or wet down a low of just 1 inch on the ground when you are cutting your grass very short andneat. Like most cutting platforms of the Cub Cadet cadet, the cutting platform of the LT 1046 has a series of antique wheels set to the outer edges.

The Cadet LT1046 spits the cut grass cuts on the right side of the platform using the download duct to prevent them from flying everywhere. If you do not like the disorderly appearance that your grass has with the cuts rotting above, you can use an optional Mulching system with the LT 1046 so that the grass cuts rot more quickly. Alternatively, if you have some money left over, you can acquire a rear tidner to collect the cuts, which will leave your grass with a much cleaner appearance.

The cutter cutting platform Cub Cadet LT1046 Speaker is propelled by the CV23 Kohler Command engine that also operates the rear wheels. This engine is a 2-cylinder model with a total displacement of 0. 624 liters. The rear wheels that drive the engine measure each 20 × 10-8 (20 inches in diameter, 10 inches of width, 8 inches in tire diameter). The operator can stop the corteped using dry disc brakes driven by pedal.

Leave A Comment