The Cub Cadet G1336 Specked is a commercial model of the same series of machines that also includes the CUB Cadet G1332 that has a slightly narrower cu t-cut platform and the Cub Cadet G1548 cut that has a larger cutting platform and a more powerful engine. The G 1336 Speaker obtains its power of a tw o-cylinder Kawasaki engine with head valves for a greater shelf life. The engine uses a pressure lubrication system to keep the engine greased throughout the operation. Starting the cortesped is quite simple thanks to a very direct setback mechanism. Although it is a sel f-propelled cutter, it has a very large fuel tank that can contain up to 18. 9 liters of gasoline.
The rear wheels of the sel f-propelled cadet cadet g1336 are operated by the engine. These wheels measure each one 13 × 6. 5-6 (13 inches in diameter, 6. 5 inches of width, 6 inches in tire diameter) and push the corteped up to a maximum speed of 11. 3 km/h (7MPH) that is very agile for a cut behind which he walks. The wheels of G 1336 are activated by means of a Parker motors system and double-gear-gear pumps in hydrostatic models and a 5-speed peerless transmission in gear transmission models.
The CUB Cadet G1336 Platform Platform is 36 inches wide (that is the cutting width, the total width of the cutting platform is approximately 10 inches more than this, since there is a large plastic discharge duct attached to theside to prevent grass cuts from flying everywhere). The platform has 2 blades and is made of 1 0-caliber steel. The Platform of the CT 1336 works in a range of 2 inches, from a height of 4 inches on the ground to a height of 2 inches on the ground. The blades of the platform are activated by Correa.