The 5 4-inch Ariens Pro Zoom Giro Zoom Specked is one of Ariens’s most powerful hosts that has a zero turn radius. It is propelled by a Kawasaki engine of the FX series produced by 27 hp. This 4-stroke and 2 cylinder machine is very agile, reaching a maximum speed of 20. 9 km/h (13 mph) and up to 8 km/h (5 mph) in reverse. The corteped is started with a contact key that uses a 12 volt battery. As Kawasaki is a known and trustworthy brand, it comes with a 2-year guarantee whether it buys it as a particular and for a commercial company.
The Ariens Pro Zoom 5 4-inch cutcase platform has a 5 4-inch cut width and consists of 3 steel blades that give a much thinner and clear cut than a single large blade. The cutting platform is built of extra steel of 7 caliber that is very unlikely to be double or double if you collide with any solid object, immovable during the operation. At the front of the cutting platform, you will also notice a number of small plastic wheels that prevent the platform from potentially spidping the land that you are traveling over.
If you are looking for a smaller but similar model, then take a look at the Ariens Pro Zoom 52 (the only big difference between these 2 is that Pro Zoom 52 is a standing machine, there is no seat). If you are looking for something bigger, then the Ariens Pro Zoom 60 could be the machine for you. Pro Zoom 60 has the same engine as the Zero Pro Zoom 54 ″. If you have or have had a Pro Zoom 54 cut, then do not hesitate to leave a comment below by listing what you like and what you do not like about it.
