Toro Z Master Z558

Review

The Zero Z558 Toro Z Toro Z558 Giro Z558 is very similar to the Zero Z528 Toro Z528 Toro Z528 Giro Speaker due to the fact that many of its possible configurations (motor/cutting platform) are actually identical. There is an option of 2 different engines when you buy for the first time the Z 558 Z-Master. The least powerful engine has a power of 28 hp. It is a kawasaki bicylinder. The most powerful engine has a higher power of 30 hp. This 30 hp engine is a tw o-cylinder Kohler engine. Both engines have valves in the head and use a pressure lubrication system. They also use a high resistance air filter to prevent dust and other particles from entering the engine.

The engine power of the Toro Z Master Z558 is transmitted to the wheels by means of a double hydrostatic transmission consisting of Hydro-Gear pumps and Parker engines. This system allows the operator to control each rear wheel separately. The right lever controls the right rear wheel while the left lever controls the left rear wheel. Pushing the levers into opposite directions is what allows a zero radio turn to be turned in the Z 558 Z Master. The maximum forward speed forward is 16. 1 km/h, while reverse can reach 10. 1 km/h.

The rear wheels of the Z Master Z558, which activate the cut, measure 24 × 12-12 (24 inches in diameter, 12 inches of width, 12 inches of tire diameter), while the semi-monumatic front wheels measure 13 × 6, 5-6 (13 inches in diameter, 6. 5 inches of width, 6 inches of tire diameter). In the Zero Z558 Giro Speech, the cutting platform can be chosen. The smallest has a 5 2-inch cut width, the next largest has a 6-inch cut width and the largest has a 7 2-inch cut width.

S-Tehnika.COM
Leave A Comment