Toro Z Master Z550


The Zero Z550 Toro Z550 Toro Z550 Giro Specked is not currently available in Toro. However, there are many available for sale in sites such as eBay, etc. Z 550 comes in many different configurations. There are 2 motor options. The least powerful is a Kohler Command Pro model of 27 hp, while the slightly more powerful model is a 28 hp Kawasaki model. Both engines incorporate a doubl e-stage air filter to prevent dust and other particles from entering the engine and affect their performance. Both engines work with gasoline. They obtain the fuel of a large deposit of 45. 4 liters (12 American gallons). This massive fuel tank is indicative of the fact that this machine is commercial.

The Z550 Toro Z550 has a range of various cutting covers with which it is compatible. The smallest cover has a 5 2-inch cut width, while the largest cover is massive with a 7 2-inch cutting width. The operator has a wide cutting range with cutting platforms. You can lower up to 1. 5 inches above the ground and all the way up to 5 inches above the ground for when you are cutting long grass / thicket.

The maximum speed of the Z550 Toro Z550 is very good, reaching 16. 1 km/h (10 mph), while in reverse it has a maximum speed of 10. 1 km/h (6. 3 mph). The spring speed is controlled by the double levers located in front of the driver. These control the rear wheels. The rear wheels measure 23 × 9. 5-12 (23 inches in diameter, 9. 5 inches of width, 12 inches in tire diameter). The front wheels are much smaller, each measures 13 × 6. 5-6 (13 inches in diameter, 6. 5 inches of width, 6 inches in tire diameter). Other models similar to Z 550 Z Master are the 5 2-inch Toro G3 Master G3 and the 6 0-inch Toro G3 Toro G3 Speaker G3.

Leave A Comment