The Toro Z Master Z500 series of Giro Zero Species consists of 3 different models. These are the Toro 74295, Toro 74296 and Toro 74297. All these shortcuts are very similar except for a small thing; the width of its cutting roofs. The 74295 bull has a 5 2-inch wide platform. The 74296 bull has a 6 0-inch platform. The 74297 bull has a 7 2-inch wide platform. The 3 of these models use the same exact engine to drive wheels and blades. This engine is a 27 HP Command Pro engine designed and built by Kohler. This Kohler engine uses a doubl e-stage air filter to clean the air inlet.
The maximum speed of the 74295 bull is slightly less than 13. 7 kph (8. 5 mph) than the 74296 bull and the 74297 bull that have maximum speeds of 16. 1 kph (10 mph). However, each of the 3 Toro Z Master Z500 hosts has a large fuel deposit that can contain a maximum of 45. 4 liters (12 gallons USA) of gasoline. These large gasoline deposits are indicative of the fact that the Z 500 series of Toro zero gyrus cortes are destined for intensive use of commercial equipment and gardening contractors that require incredibly long continuous operation times.
The three housings of the Toro Z Master Z500 Species are ‘Turbo Force’ housings built with hig h-strength 7 caliber steel. The three also have bumpers in the front of the cutting platform to reinforce the platform and prevent it from deviating under heavy load. The depth of the three cutting platforms is 5. 5 inches, while its cutting width can be adjusted from 1. 5 inches to 5 inches above the ground. The platform rises with the help of a compression spring and an elevation pedal. Zero Toro Toro Specifies similar to the models of the Z500 range are the 74953 G3 G3 G3 Commercial Series Mower and El Toro 74951 G3 Commercial Series Lawn Mower.
