The ZX5450 Toro Titan Toro Toro Toro Toro Specked is one of the largest models of the Titan Specker. It has a width of a cut than that of the Titan ZX4800 bull or that of the Titan ZX5000 bull. The cutting platform of this model has a 5 4-inch cut width (the name should have made it obvious!). The Titan ZX5450 platform is built with 10 caliber soldier steel that is very unlikely to fracture or break, even after multiple blows and falls. The cutting platform has a series of anti-discamination wheels that force the platform of the cutting to follow the contours of the soil on which it moves and avoid scraping it.
The engine that activates the Toro Titan ZX5450 Specker Platform is a coupage model manufactured by Kohler. This engine has a displacement of 0. 725 liters and is a 4-stroke model and 2 cylinders. The engine uses a full pressure lubrication system to keep all completely greased mobile parts and as free as possible. The KOHLER COUNGE engine of the ZX5450 bull uses a large double element air filter to prevent dust and other particles from entering the engine and potentially disturb the combustion process. The engine uses a double Hydro Gear ZT 2800 hydrostatic transmission to transfer engine power to the wheels.
The speed and control of the Titan ZX5450 bull are managed by the double return bars (levers) located in front of the operator. The Titan ZX 5450 can reach an impressive maximum speed of 12. 1 km/h (7. 5 mph) going forward, while reverse has a maximum speed of 6. 1 km/h (3. 8 mph). The rear wheels of this cortesped measure 20 × 10 (20 inches in diameter, 10 inches wide), while the front wheels are a little smaller, measuring 11 × 4 (11 inches in diameter, 4 inches wide).
