The Zero Poulan Pro 380ZX GiroCésped Specked is one of the least powerful zer o-rotu s-pr o-rotation models of Poulan Pro that in many aspects is very similar to Poulan Pro 301zx except for the fact that 380 ZX has a major cutting width. The engine that acts on 380zx is an intek of Briggs and Stratton. This gasoline engine pumps 16. 5 hp of its cylinder. The engine transfers power to the wheels through a dual ezt hydrostatic transmission. This Hydro-Gear gearbox allows the operator to control each rear wheel separately from the other using the laps bars in front (there is no steering wheel).
Hydro-Gear transmission provides Poulan Pro 380ZX for a maximum speed of 10. 5 km/h (6. 5 mph). Although the engine only produces 16. 5 hp, it has a quite wide cut of 38 inches. The cuttin g-edge platform is built of stamped steel, which means that it has less joints compared to similar platforms that are made of screwed or soldier steel. The cutting platform has a cutting range of 2. 5 inches from a height of 4 inches above the ground to a height of 1. 5 inches above the ground. The cutting platform rises and lowers in small increases of 0. 5 inches. There are 2 blades hosted on the cutting platform. The 380 ZX is manually stamped.
The rear wheels of the Zero Poulan Pro 380ZX gyruscate do almost all the work since they are responsible for boosting it as well as changing their direction. They also support most of the weight of 380zx. That is why they are much larger, they measure 18 × 7. 5-8 (18 inches in diameter, 7. 5 inches wide, 8 inches in tire diameter) while the front wheels only maintain the elevated cutting platform above thegrass. The front wheels are correspondingly smaller, measuring 11 × 4-5 (11 inches in diameter, 4 inches of width, 5 inches in tire diameter).
