John Deere Z655


The zer o-rotation sport of Giro John Deere Z655 is the largest of the 2 JD Z6 Range Species, being the other cu t-off the John Deere Z645. The JD Z 655 has the same 27 hp engine as its little brother. It is a ai r-cooled bicylindrical engine that has a pressure lubrication system with an oil capacity of 1. 7 liters. The maximum speed of these machines is also the same as its little brother, the JD Z645, reaching 14. 5 kph (9 mph). Having many of the same attributes, both machines can be easily confused. However, there is an important difference between the two.

The John Deere Z655 has a larger cutting platform. The cutting width of the cutting platform in the JD Z655 comes in 54 inches. This platform of the cutter is built from the very strong steel of 9 gauges and is led. The total weight of the machine, with the mounted cutting platform is 340 kg (750 pounds). It has a wheelbase of 1. 25 m (49 inches) and a length of 1. 93 m (76 inches).

The John Deere Z655 wheels are quite large, which makes the driving soft and that it is very unlikely to leave thread marks, even if the floor is very soft. The rear wheels measure 23 × 10. 5-12 (23 inches in diameter, 10. 5 inches wide, 12 inches in tire diameter), while the front wheels measure 13 × 6. 5-6 (13 inches in diameter, 6. 5 inches wide, 6 inches in tire diameter). Even if you hit a large obstacle while operating the JD Z655, it is very unlikely to be doubled or broken due to the fact that the frame is built of hig h-strength soldier steel. If you own a Z 655, then please do not hesitate to leave a comment below so that others know what they should expect if they buy one.

13 Reviews of the John Deere Z655

He has more retention, 2 hours in him used it 4 years now he has 172 hours the only thing that went wrong was the right direction axis came to 4 hours distributor wine and he got any problem arranged since then Steve

Good until a strap is released.

If you cannot change the transmission belt in 5 minutes that AINT holding your right mouth. I have done it in my Z655 a couple of times and do not even need tools. The cutter can be Jacke through the silencer protector, and supported by the wheel engines with the supports if necessary. The main cover belt is more difficult and will need tools. My Briggs 27HP has 1500hrs and is still very good. Use a cup of oil between changes at 50hrs. The frame although it has an oxide under the section of the box in the Curva Justo Begore section is found with the left rotating wheel housing. So be careful with that. This is definitely a weak point since steel stretches in manufacturing. Anything about 1000 hours will need new spindle bearings, and probable oil leaks on the axis of the strength and the governor’s axis, but easy solution.

I’m glad I bought the machine

We use this machine to cut in our golf course. It is very fast and does a good job, but it can be dangerous in the descents, especially around the ponds.

The 265 I had was a much better machine. I made the mistake of thinking that this was an update.

The concessionaire had it for 17 months and could not fix it. There is no customer service because I paid in cash (they already had my money)

Limited to this point, 5/24/2012, but I can say so far, Awesome. Now if I would only rain. Have a nice day.

I have only had this machine for a few months, but I have found that it is an exceptional piece of the teams. I exchanged an 1 1-year LX277 and received half of what I paid for it new, there was also an incentive of $ 300. 00. Having never driven a zero turn, it is a pretty new experience, but you will be surprised how fast you do with it. I have 1 1/2 acres to be of the relatively flat feature, there are some small hills and cruises around large. I got with the Mulching kit and I am surprised at how well it does, the cuts simply disappear in the grass. I strongly recommend this machine for anyone with a large grass, and they want to do it quickly, and have a good time while in it. I love it, A +++ and +

Great. He had a small leak in the bomb’s corner at the time of delivery. The concessionaire picked it up and returned it in 24 hours. That is why things are not bought in the large surfaces. I couldn’t roll the grass before it dried. However, he was still able to shave about 1hr. of my cutting time. I hope that after returning my patio, which will take even less time, since faster speeds will be allowed. Multiple safety redundancies. Almost too many, but I am sure there is one for each demand that have passed (or that is expected). Do not use the washing port! I have heard this from the concessionaires John Deere and Cub. Think about it for a minute. You are going to put cold water in/in a hot bearing. The humidity will stay there until the next time you use it. Stop being lazy and scrape the roof after a cut or two with a wooden spatula. Not to mention, that he will leave an infernal mess.

Leave A Comment