The Husqvarna Husqvarna Husqvarna is very similar to Husqvarna Wh5217 but unfortunately it is not so great. It is also very similar to Husqvarna Wh3617, but it has a wider cut platform. The engine that drives Wh 4817 is a kawasaki bicylinder. This engine uses a dr y-type air filter to prevent dust and other particles from entering the combustion chambers, where they can interrupt the ignition process and, ultimately, damage the engine. The fuel tank supplied to the engine has a maximum capacity of 20. 1 liters.
This Kawasaki engine drives the rear wheels of the Husqvarna Wh4817. These wheels are quite large since they support most of the 220 kg mapping (485 lbs). They also have a grass thread to provide a good grip without leaving great marks on the floor if it turns out to be soft. The front wheels are bald on purpose so that they move easily on the ground without grabbing it. These wheels are linked to reinforced forks for an exceptionally long shelf life. The maximum speed at which the WH4817 can move is 9. 7 km/h, which means that the operator will have to jog quite fast just to keep the pace.
The Husqvarna Wh 4817 cutting platform has a 4 8-inch cutting width (although it should have already guessed by the name). 3 blades are housed on the platform, each of which has a diameter of 16. 25 inches. The platform rises and descends through a manual lifting system. Correa operated blades are engaged by an electrical clutch. If you have to cut very long or wet grass, Wh 4817 can do it, since the platform can rise up to 5 inches above the ground. But if you want a low cut, you will be happy to know that the platform can be lowered to 2. 5 cm above the ground.
