Husqvarna Rider 175


The Husqvarna Rider 175 cutting uses a Briggs and Stratton engine. It is a quite small cylinder engine that has a total displacement of only 0. 502 liters. The engine is not overheat thanks to an air cooling system and uses valves in the head. The engine uses a standard air filter to clean dust and other air inlet particles during operation, which can damage the engine. The total engine power is 17. 5 hp. The 175 Rider Speaker is very different from any other Husqvarna host. The platform is mounted on the front, however, it has the feeling of being almost a cortesped tractor.

The Husqvarna Rider 175 platform is combiclip type. This platform has 3 blades and a total 4 1-inch cutting width. The platform is operated by Correa and has 2 larg e-caliber wheels in the front of it to prevent it from getting hooked on the ground as it moves through it. The cutting platform can rise and get off at 7 cutting positions. The lowest position is 1. 6 inches above the ground, while the highest is 3. 5 inches above the ground. While the cutting width of the cutting platform is 41 inches, the total width of the machine is 44. 1 inches due to the protective edges around the platform.

Using a Tuff Torq K46 hydrostatic transmission, Husqvarna Rider 175 is automatic and does not require gears. It has a maximum speed of 9 km/h when it moves forward, but when it goes back, it can only reach 3. 1 km/h. Unlike many zer o-rotation tractors and spi n-rotors that have front and rear wheels of different size, the 4 wheels of Rider 175 are the same size.

Leave A Comment