The Husqvarna Iz6125 zer o-rotation cite is of the same line of machines that also include the Iz4217 husqvarna and the Iz4819 husqvarna, but it is much more powerful than these 2 machines. It also has a much larger cut platform. Its cutting platform has a 6 1-inch cut width. However, its total width is actually much greater, 75 inches, since it has a large plastic discharge duct on the right side that prevents the grass (and other waste being aspirated by the blades and fly everywhere). The cutting platform has 3 blades operated by Correa. The three blades are identical and have a length of 21 inches. The IZ6125 cut platform is obviously quite heavy. That is why there is a pedal that helps the operator upload it and lower it. When pressing the pedal, the platform can be raised from a minimum cutting height of 1. 5 inches above the ground to a height of 5 inches.
The engine that drives the Iz6125 husqvarna platform is a Kohler Command engine. This tw o-cylinder engine has head valves and a maximum power of 25 hp. The engine uses a dr y-type air filter to clean dust air and other particles before the 2 combustion chambers enter. The engine transmits the power to the rear wheels by means of a combination of Hydro-Gear transmission and Parker Rueda engines. This system confers at the IZ 6125 a maximum speed of 15. 3 km/h.
The handlebars with which the Iz6125 husqvarna are ergonomic and adjustable at its height for a more comfortable handling experience. The total weight of the machine is quite high, 417. 3 kg. If an IZ 6125 has ever had or operated, then please describe your experience in it, leaving a comment.
