The 1830SB Husqvarna snow blower may seem very similar to the Husqvarna 1830HV snow blower, since they have the same cleaning widths, but there are also some differences. The 1830 SB double stage snow blower is also propelled by a 2-stroke LCT engine. It is the same engine as the Husqvarna 1830HV snow blower and has a 0. 41 liter displacement. The engine can be started using the electricity grid, simply by clicking a button to start it and plugged it. However, if you are not close to a plug or electricity grid, there is also a traction cable, a setback system that you can use to start it.
While the cleaning width of the Husqvarna 1830SB removes is 0. 76 m (30 inches) has a cleaning height of 0. 58 m (23 inches). The snow that enters the cleaning zone is first found with the endless steel endless that has a diameter of 0. 3 m (12 inches). This endless first breaks the snow into smaller pieces before sending it to the driver located in the center of the housing. The driver is also made of steel and consists of 3 blades. Further crushing snow and, at the same time, expels it at high speed through the outstanding duct.
The Husqvarna 1830sb snow blower duct is made of steel and is covered with powder paint to avoid obstructions. It is controlled from the operator position and can turn 200 degrees. The deflector located at the top of the duct allows the operator to more control over where he directs the snow. Thanks to the fact that 1830sb is a double stage launches, it is able to send the snow up to 10. 7 m (35 feet) away from where it is collected. If you are interested in a smaller version of this machine, take a look at the Husqvarna 11527SB snow blower.
