The zero-turning z-corce 44 turning cadet 44 spinstress works with a Kohler courage pro motor. It is a 2-cylinder engine that uses a fully pressurized lubrication system so that everything works smoothly and efficiency. The engine has a paper element air filter that prevents dust and other pollutants from entering combustion chambers where they can obstruct and interrupt the ignition process. There is a 1 2-volt key mechanism that provides 275 cold starting amps to the engine. This battery is recharged through a 15 amps alternator when the engine is running. The maximum power of the Kohler engine is 20 hp. The Z FORCE 44 Specker uses a Dual Hydro-Gear ZT2800 hydrostatic transmission to transfer the power to the rear wheels. This provides a maximum speed of 11. 3 km/h (7 mph) when it moves forward. All steering and power control is done with the lap bars located in front of the driver.
The Cub Cadet Z-Force 44 cutter platform has a 44-inch cutting width. This platform houses 3 identical blades inside. The Z-Force 44 platform is made of 12 caliber steel. The 3 blades are operated by Correa. The 3 blades are driven by a belt reinforced with Kevlar. You can adjust the cutting platform over 3 inches from a 4-inch high to 1 inch on the ground. One of the very practical features of this platform is the Smartjet high pressure washing system (you just have to connect a hose and hook the platform for a minute more or less) to clean the cutting platform very quickly.
When buying the CUB Cadet Z-Force 44, it comes with a limited guarantee of 180 hours or 3 years (which happens first). If you like the zero-gyrus spinning zFORCE44, but you want a wider cut platform, take a look at the Cub Cadet Z-Force 50, larger.
