Bad Boy 6000 Pup


The Zero Bad Boy 6000 PUP Giro Specked is the largest of the 2 Models of the Badboy PUP series. The Bad Boy 5200 PUP is smaller with a 5 2-inch cutting width. The Zero Bad Boy 6000 PUP gyrish cutter has a cutting platform with a 6-inch cutting width. This platform has 3 blades, each of which has a total length of 20. 5 inches. These blades are 2. 5 inches wide and have a thickness of 0. 25 inches. The blades have been thermally treated to give them a longer life. The cutting platform is made of steel manufactured with a thickness of 0. 25 inches. The platform is floating and uses a total of 6 antical wheels to guide it on the contours of the grass that is cutting. The operator can raise and lower the platform in a range of 3. 5 inches, from a minimum of 1. 5 inches above the ground to a maximum of 5 inches above the ground. The platform has infinite heights thanks to its electronic instant lifting actuator system.

The Zero Bad Boy 6000 PUP GiroCésped Badge the cutting platform with a 30 hp Kohler Command engine. This engine has a displacement of 0. 745 liters and starts with key. The operator controls the speed and direction of 6000PUP using a set of lap bar that are highly adjustable to adapt to the needs of the operator.

The total weight of Bad Boy 6000 PUP is 547 kg. Although it has a 6-inch cut width, its total width (without plastic discharge lid) is 61. 5 inches. PUP 6000 can reach a maximum speed of 16. 1 kph (10 mph) when it moves forward and uses a drum brake to reduce speed. If you have ever used this Badboy zer o-gourted cut, please leave a comment from your experiences below to give others an idea of what you can expect.

Leave A Comment